 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Transistor 2SA0683, 2SA0684 (2SA683, 2SA684) Silicon PNP epitaxial planer type For low-frequency power amplification and driver amplification Complementary to 2SC1383 and 2SC1384 5.90.2 Unit: mm 4.90.2 G G Complementary pair with 2SC1383 and 2SC1384. Allowing supply with the radial taping. (Ta=25C) Ratings -30 -60 -25 -50 -5 -1.5 -1 1 150 -55 ~ +150 Unit V 2.540.15 +0.3 +0.2 I Absolute Maximum Ratings Parameter Collector to base voltage Collector to 2SA0683 2SA0684 2SA0683 Symbol VCBO VCEO VEBO ICP IC PC Tj Tstg emitter voltage 2SA0684 Emitter to base voltage Peak collector current Collector current Collector power dissipation Junction temperature Storage temperature V 0.45-0.1 0.45-0.1 1.27 +0.2 V A A W C C 1.27 13.50.5 0.7-0.2 0.70.1 8.60.2 I Features I Electrical Characteristics Parameter Collector cutoff current Collector to base voltage Collector to emitter voltage Emitter to base voltage Forward current transfer ratio Collector to emitter saturation voltage Base to emitter saturation voltage Transition frequency Collector output capacitance *h (Ta=25C) Symbol ICBO Conditions VCB = -20V, IE = 0 IC = -10A, IE = 0 IC = -2mA, IB = 0 IE = -10A, IC = 0 VCE = -10V, IC = -500mA VCE = -5V, IC = -1A IC = -500mA, IB = -50mA IC = -500mA, IB = -50mA VCB = -10V, IE = 50mA, f = 200MHz VCB = -10V, IE = 0, f = 1MHz -30 -60 -25 -50 -5 85 50 - 0.2 - 0.85 200 20 30 - 0.4 -1.2 V V MHz pF 340 min typ max - 0.1 Unit A V 2SA0683 2SA0684 2SA0683 2SA0684 VCBO VCEO VEBO hFE1 hFE2 VCE(sat) VBE(sat) fT Cob * 3.2 1 2 3 1:Emitter 2:Collector 3:Base EIAJ:SC-51 TO-92L Package V V FE1 Rank classification Q 85 ~ 170 R 120 ~ 240 S 170 ~ 340 Rank hFE1 Note.) The Part numbers in the Parenthesis show conventional part number. 1 Transistor PC -- Ta 1.2 -1.5 Ta=25C 2SA0683, 2SA0684 IC -- VCE -1.2 VCE=-10V Ta=25C -1.0 IC -- IB Collector power dissipation PC (W) 1.0 -1.25 -9mA -1 -8mA -7mA -6mA -5mA -4mA -3mA -2mA -1mA 0.8 0.6 - 0.75 0.4 - 0.5 0.2 - 0.25 0 0 20 40 60 80 100 120 140 160 0 0 -2 -4 -6 -8 -10 Collector current IC (mA) IB=-10mA Collector current IC (A) - 0.8 - 0.6 - 0.4 - 0.2 0 0 -2 -4 -6 -8 -10 -12 Ambient temperature Ta (C) Collector to emitter voltage VCE (V) Base current IB (mA) VCE(sat) -- IC Collector to emitter saturation voltage VCE(sat) (V) -100 -30 -10 -3 -1 Ta=75C 25C -25C VBE(sat) -- IC Base to emitter saturation voltage VBE(sat) (V) IC/IB=10 -100 -30 -10 -3 -1 Ta=-25C 75C 25C IC/IB=10 -600 hFE -- IC VCE=-10V Forward current transfer ratio hFE -500 -400 Ta=75C -300 25C -25C - 0.3 - 0.1 - 0.3 - 0.1 -200 -100 - 0.03 - 0.01 - 0.01 - 0.03 - 0.1 - 0.3 - 0.03 - 0.01 - 0.01 - 0.03 - 0.1 - 0.3 -1 -3 -10 -1 -3 -10 0 - 0.01 - 0.03 - 0.1 - 0.3 -1 -3 -10 Collector current IC (A) Collector current IC (A) Collector current IC (A) fT -- IE 200 180 Cob -- VCB 50 -120 VCER -- RBE Collector to emitter voltage VCER (V) IE=0 f=1MHz Ta=25C IC=-10mA Ta=25C Collector output capacitance Cob (pF) VCB=-10V Ta=25C 45 40 35 30 25 20 15 10 5 0 -1 Transition frequency fT (MHz) 160 140 120 100 80 60 40 20 0 1 3 10 30 100 -100 -80 -60 2SA0684 -40 2SA0683 -20 -3 -10 -30 -100 0 0.1 0.3 1 3 10 30 100 Emitter current IE (mA) Collector to base voltage VCB (V) Base to emitter resistance RBE (k) 2 Transistor ICEO -- Ta 104 VCE=-10V -10 -3 ICP 103 2SA0683, 2SA0684 Area of safe operation (ASO) Single pulse Ta=25C Collector current IC (A) -1 t=10ms IC t=1s ICEO (Ta) ICEO (Ta=25C) - 0.3 - 0.1 - 0.03 102 2SA0683 -1 -3 -10 - 0.003 1 0 20 40 60 80 100 120 140 160 - 0.001 - 0.1 - 0.3 -30 2SA0684 -100 10 - 0.01 Ambient temperature Ta (C) Collector to emitter voltage VCE (V) 3 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR |
Price & Availability of 2SA684
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |